The Keystone Jacks are designed to snap easily in and out of the wall outlets, surface mount boxes,
and patch panels, including 6, 8 and 10-way modular configurations.
The horizontal cable (solid wire) is individually terminated by IDC (Insulation Displacement Connectors) using a punchdown tool.
The front of the jack (RJ45) is connected to the equipment by patch cord (stranded wire).
The Keystone Jacks come with T568A or T568B wiring and comply fully with TIA/EIA-568-B.2-1 specifications for Insertion loss (Attenuation),
Near-end crosstalk (NEXT) loss, Return loss, and Far-end crosstalk (FEXT) loss for any pair combination up to 250 MHz.
SPECIFICATIONS
RoHS Compliant
UL & 3P Certified
Meet FCC parts 68
Meet ANSI/TIA/EIA-568-B.2-1, ISO/IEC 11801 2nd edition, CENELEC EN 50173-1, IEC 60603-7-4 requirements
PHYSICAL
Contact Wiring: Phosphor Bronze,3-50 micro inch of gold over nickel plating.
Housing: High Impact flame retardant plastic, UL 94V-0 rated.
IDC: accept 22~26 AWG solid wire
MECHANICAL
Jack Mating Cycles: 750
Jack Contact Force: 100 grams minimum
ack Pull Force: 20 lbs (89N)
Temperature: -40℉ to 158℉ (-40℃ to 70℃)
ELECTRICAL
Current Rating: 1.5 Amps
Contact Resistance: 20 milliohm maximum
DC Resistance: 0.1 ohm maximum
Insulation Resistance: 500 megohms minimum
Data Transmission Rates: Up to 10Gbps
APPLICATION
Ethernet 10BASE-T, Fast Ethernet 100BASE-TX, Gigabit Ethernet 1000BASE-T, 10 Gigabit Ethernet 10GBASE-T,
ATM, 4/16MB Token Ring, CDDI, TP-PMD, ISDN, ADSL